π WS2812B Addressable RGB LED Strip β 5M, 60 LEDs/m, IP68 Waterproof (5V DC)
A full 5-metre roll of individually addressable WS2812B RGB LED strip with 60 LEDs per metre (300 LEDs total) and an IP68 waterproof rating β fully submersible for outdoor, pool, and wet-area installations. Each LED can display a different colour simultaneously, enabling custom animations, colour chasing, rainbows, and more. DC 5V powered. Compatible with Arduino, ESP8266, ESP32, Raspberry Pi, WLED, ESPHome, Home Assistant, and any WS2812-compatible controller.
Choose your WS2812B strip:
β‘ Key Features
- IP68 Waterproof β Fully Submersible β silicone tube encapsulation protects LEDs from rain, sprinklers, splashes, and even underwater installations (pools, ponds, fountains)
- WS2812B Individually Addressable β each of the 300 LEDs can display a unique colour; create animations, colour chasing, fire effects, rainbows, and custom patterns
- 60 LEDs per Metre / 300 LEDs Total β high density for smooth colour transitions and rich lighting effects over the full 5-metre roll
- DC 5V Low Voltage β safe to touch and handle; no mains wiring required
- Single Data Wire β only 3 connections needed: 5V, GND, and Data In (DIN)
- Cuttable Every LED β trim to exact length at the marked cut points (every ~16.7mm)
- WLED / ESPHome / Home Assistant β flash WLED onto a D1 Mini or NodeMCU for instant smartphone control with hundreds of built-in effects, or use ESPHome for full Home Assistant integration
- Arduino / ESP32 / Raspberry Pi β use FastLED or NeoPixel libraries for custom code
- Black PCB β blends into dark mounting surfaces for a cleaner look outdoors
- 3M Adhesive Backing β peel-and-stick installation (use additional mounting clips for outdoor longevity)
π Perfect For
Pool & Pond Lighting
IP68 means fully submersible. Add colour-changing lighting to pools, koi ponds, water features, and fountains. Seal the connections with waterproof connectors or marine-grade silicone.
Outdoor Accent Lighting
Line braai areas, patios, pergolas, garden paths, and boundary walls. IP68 handles South African thunderstorms, sprinkler overspray, and humidity without issue.
Holiday & Event Lighting
WLED includes Christmas, Halloween, and party effects out of the box. Set schedules via Home Assistant β lights turn on at sunset and off at midnight automatically.
Vehicle & Carport Underglow
Waterproof rating makes it suitable for carport and vehicle accent lighting. Power from a 5V USB supply or regulated 5V from a 12V car battery (via DC-DC converter).
π§ IP68 vs IP20 β Which Do You Need?
IP68 (this product) β fully encased in silicone tube; handles rain, submersion, and constant outdoor exposure. Slightly less bright than IP20 due to the silicone diffusion, but the trade-off is complete weather protection.
IP20 (indoor version) β no waterproof coating; maximum brightness and flexibility. Perfect for bedrooms, TV backlights, desks, and shelving. Not suitable for any moisture exposure.
π Pair With
D1 Mini
Flash WLED or ESPHome. Connect DIN to GPIO2, add a 330Ξ© resistor, and you have a full smart LED controller for under R100.
View Product β
NodeMCU ESP8266
Larger board with more GPIOs. Same WLED/ESPHome capability as the D1 Mini. Breadboard-friendly for prototyping.
View Product β
π Technical Specifications
| Product | WS2812B Addressable RGB LED Strip (IP68) |
| LED Chip | WS2812B (5050 RGB with integrated IC) |
| LED Density | 60 LEDs/m (300 LEDs total) |
| Strip Length | 5 metres |
| Voltage | DC 5V (do NOT use 12V) |
| Power Consumption | ~18W/m (full white) Β· ~90W total at full brightness |
| Recommended PSU | 5V 6A (30W) minimum Β· 5V 10A (50W) for full brightness headroom |
| Waterproof Rating | IP68 β fully submersible (silicone tube) |
| Data Protocol | Single-wire (800 kHz NRZ) Β· 1 data pin required |
| Colour Depth | 24-bit (8-bit per channel Γ 3 RGB) |
| PCB Colour | Black |
| Cuttable | Every LED (~16.7mm intervals) |
| Adhesive | 3M tape backing |
| Compatible Software | WLED Β· ESPHome Β· Home Assistant Β· FastLED Β· NeoPixel (Adafruit) |
| Compatible Hardware | D1 Mini Β· NodeMCU Β· ESP32 Β· Arduino Β· Raspberry Pi |
β Frequently Asked Questions
Can I use this in a swimming pool?
What power supply do I need?
What’s the difference between this and the IP20 version?
Do I need a separate controller?
Can I extend beyond 5 metres?
π€ Need Help? We’re Here for You!
Visit Us
8 Wildebraam Street
Weltevreden Park, Roodepoort
Gauteng, 1709
Light Up Your Outdoors π
IP68 waterproof addressable LEDs β pool, patio, garden, anywhere.
Reviews
There are no reviews yet.